EN | BM

HX-40RAM

Sebelumnya 11 / 20 Seterusnya

HX-40RAM Sistem Penggera


Specifications

Model HX-40RAM
Detection method Passive infrared
PIR Coverage 12 m (40 ft.) 85° wide / 94 zones
Distance limit 4 m, 5.5 m, 9 m, 12 m (13 ft, 18 ft, 30 ft, 40 ft.)
Detectable speed 0.3 – 1.5 m/s (1 – 5 ft/s)
Sensitivity 2.0°C (3.6°F) at 0.6 m/s
Power input 2.5 – 9VDC
3 - 7.2VDC Lithium Battery
(CR123A x 3, CR2 x 3, 1/2AA x 3, 1-2AA x 6)
Current draw 30 ?A (standby) / 4mA (max) at 3VDC
Alarm period 2.0 ± 1 sec
Warm-up period Approx. 60 sec(LED blinks)
Alarm output Form C - Solid State Switch - 10VDC 0.01A max
Tamper output Form C. 28V DC, 0.1A max. changes when cover is removed
Trouble output N.C./N.O. Selectable - Solid State Switch - 100VDC 0.01A
Aux input -
LED indicator Disable : During normal operation.
Enable : During WALK TEST or LED SW on.
Red : Warm-up, Alarm, Trouble, Low battery
RF Interference No alarm 10 V/m
Operating temperature -20 – +60°C (-4 – +140°F)
Environment humidity 95% max
Weatherproof IP55
Mounting Wall (Outdoor, Indoor)
Mounting height 2.5 - 3.0 m (8.3 - 10 ft.)
Bracket adjust angle Vertical: ± 20° Horizon: ± 95°
Weight 600g (21.2 oz)
Accessories

Bracket, Hood, Area masking seal,
Screw kit (3×10-2, 4×20-4)
Battery lead×2, Dummy battery kit

Sila tinggalkan pertanyaan anda disini, kami akan balas secepat mungkin.
Nama*  
Nama Syarikat  
Produk Berminat  
Kuantiti  
Emel*  
No. Telefon*  
Nama Penerima  
Alamat Penghantaran  
Lampiran  
*only support gif, jpeg, jpg, png, pdf
Mesej*  

Tukar ke versi mobile